AR15-A3 Stripped Upper Receiver, Mil Spec, W / Black Hard Anodized Finish - U.S. Commercial Contractor - Minor Factory Blems

What a find. The manufacturer of these receivers produces this same receiver for a couple of the biggest names in the firearms industry. Because of proprietary agreements we cannot disclose the manufacturer or the brand names that these same receivers service, but you can be assured of their quality. This particular lot came to us as factory blems but don't let that scare you. They are called factory Blems by the manufacturer as they may possess slight cosmetic blemishes. In the case of this particular lot the anodized finish was a little heavier than normal and some of the pin hole points had to be opened back up to original diameter spec after the fact. Even then the process was only required in around 20 % of the lot but because of contractual obligations the entire lot was rejected and we were able to purchase them at a deep discount as Blems. Please know that structurally and dimensionally they are exactly the same as A1 premium grade receivers and honestly I think we could still sell them as such and 99 out of 100 people would never notice the difference but in the interest of full disclosure we are telling you about it here.

Plesase Note: As we continue to sell these uppers we have had few reports from our customers stating the dust cover is not staying tightly closed. We have had just a few reports but to be completely transparent we wanted to share what we found. 

More about the receivers. These are manufactured from 7075 T6 Aluminium Forging to Mil Spec .They all features M4 Feed Ramps, and a Black Hard Anodized Finish - Anodizing can be done in many shades and one of the brands supplied by this vendor uses this particular black finish for one of their rifle lines. However it is not a pure deep or midnight black but rather the more consistent gray  /black that you would associate with most AR-15 platform rifles.  The quality is incredible and the price is certainly right. Does not include the trap door assembly or forward assist. ( Sold Separately ).
Can be used for Multiple Calibers on the AR15 Platform - No FFL Required

These match up fantastically to our Mag Tactical premium grade light weight lowers. Please see video for details. 

Note - We also have some of these receivers in what the manufacturer considers to be their A1- Non Blem Condition. They are a little more expensive but honestly, the difference is so minor or even in many cases non existent between the Blems and the Non Blems that I would never pay it. But that's just me. To many people a few bucks is not that big a deal either way so your call. 

Note images above are actual images taken by us of the product.